Asus P8Z77-V DELUXE Manual page 77

• Press the Clear CMOS switch to clear BIOS setup information only when the system
hangs due to overclocking.
• DO NOT insert a different connector to the external SATA port.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
• If you want to use the hot-plug function of the external SATA ports, you have to set the
ASMedia
the ASMedia
section 3.5.6 Onboard Devices Configuration for details.
* Bluetooth module LED indications
Status
Off
Blue
Blinking
ASUS Wi-Fi GO! card automatically sets itself to the country's available Wi-Fi channels,
** LAN ports LED indications
Activity Link LED
Status Description
OFF No link
ORANGE Linked
BLINKING Data activity
*** Audio 2, 4, 6, or 8-channel configuration
Port Headset
2-channel
Light Blue Line In
Lime Line Out
Pink Mic In
Orange –
Black –
Gray –
2-52
®
OS environment and after the USB 3.0 driver installation.
®
1061 SATA controllers item in the BIOS setting to [Enabled] and install
®
1061 SATA controllers from the motherboard support DVD. Refer to
Description
No link
Linked
Data activity
Speed LED
Status Description
OFF 10 Mbps connection
ORANGE 100 Mbps connection
GREEN 1 Gbps connection
4-channel 6-channel
Line In Line In
Front Speaker Out Front Speaker Out
Mic In Mic In
– Center/Subwoofer
Rear Speaker Out Rear Speaker Out
– –
* Wi-Fi LED indications
Status Description
Off No link
Green Linked
ACT/LINK
LED
LAN port
8-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
Chapter 2: Hardware information
SPEED
LED