System Agent Configuration - Asus P8Z77-V LE User Manual

S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode],
and allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled]
[Enabled]
3.5.4

System Agent Configuration

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
System Agent Configuration
Memory Remap Feature
> Graphics Configuration
> NB PCIe Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to select a primary display from iGPU, PCIE, or PCI graphic devices, or select SG
for switchable GFX. Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M] [128M] ~
[448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices. Configuration
options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and discrete
graphics. The iGPU shared memory size will be fixed at 64MB. Configuration options:
[Disabled] [Enabled]
3-20
Ai Tweaker Advanced
System Agent Configuration >
Allow you to enable remapping the memory above 4GB.
Disables this function.
Monitor Boot
Enable or disable memory remap above
4G.
Enabled
Chapter 3: BIOS setup
Tool