Installing A Hard Disk Drive; Specifications - Sony CECH-4008A Manual

Installing a hard disk drive

To install an internal hard disk drive in the PS3™ system - you
will need a compatible hard disk drive and the mounting bracket
(CECH-ZCD1) (both products sold separately). For more
details, please refer to the instruction manuals supplied with
each product.
An official hard disk drive (with mounting bracket) (CECH -
ZHD1) is available to purchase separately.
The following type of hard disk drive may be installed:
Size
Interface format
*1 Proper operation is not guaranteed for all models.
*2 Parallel ATA is not supported.
12
2.5 inch / 63.5 mm (internal type)
*2
Serial ATA

Specifications

Design and specifications are subject to change without notice.
Depending on the software version in use, the system may
operate differently than described in this manual.
PlayStation
CPU
GPU
*1
Audio output
Memory
System storage
Inputs/outputs
Networking
Controller
3 system
®
Cell Broadband Engine™
RSX™
LPCM 7.1ch, Dolby Digital,
Dolby Digital Plus, Dolby
TrueHD, DTS, DTS-HD, AAC
256 MB Main Memory,
256 MB Graphics Memory
*1
12 GB
*2
Hi-Speed USB (USB 2.0) × 2
Ethernet (10BASE-T, 100BASE-TX,
1000BASE-T) × 1
IEEE 802.11b/g
Bluetooth
Wireless Controller (Bluetooth
2.0 (EDR)
®
)
®