WARNING To prevent possible hearing damage, do not listen at high volume levels for long periods. Safety and precautions Carefully read the information in this instruction manual and on the package before using this product. Also read the instructions for the PlayStation ® 4, PlayStation ® 3 and PlayStation ® Vita. Retain all documentation for future reference.
Page 3
Do not disassemble or insert anything into the headset because this may cause damage to ˎ the internal components or cause injury to you. Observe all signs and instructions that require an electrical device or radio product to be ˎ switched off in designated areas, such as gas/refuelling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft.
Part names and functions Front Headband (folds) R marking SOUND/CHAT button Adjust the chat voice volume in relation to the game sound. Microphone (integrated) Avoid leaving the headphones near speakers while the microphone is on, because this may produce feedback (audio noise). Status indicator POWER switch Sets audio mode or turns off headset.
Rear L marking VSS (Virtual Surround Sound) button The Virtual Surround Sound effect is on by default. Press and hold for more than one second to turn the VSS on or off. MUTE button Short press to switch microphone MUTE on and off. ˎ...
Bottom USB port Connect to a supported USB device to charge the headset. Audio input jack When the included audio cable is connected to the headset for use with mobile devices, the wireless function is turned off. Wireless adaptor Reset button Status indicator...
Slide the POWER switch to position “1” or “2”. Using the headset with the applicable PlayStation ® systems Compatible with the PS4™ and PS3™ system software version 1.60 / 4.20 or later. Only one headset at a time can be used with the PS3™ system. More than one headset can be used with the PS4™...
To change the PlayStation ® audio output on the PS3™ system and enable/disable the VSS (Virtual Surround Sound) button, select (Settings) (Accessory Settings) [Stereo Headset Audio Extension]. On the PS4™ system, select (Settings) (Sound and Screen) [Audio Output Settings] [Output to Headphones].
Using the headset with a portable device You can use the included audio cable to connect the headset to the headphone jack of portable devices such as the PS Vita system, allowing you to listen to audio and use the voice chat feature. Notes When the included audio cable is connected to the headset, the VSS (Virtual ˎ...
Charging the headset When remaining battery level is low, the status indicator flashes red and a beep is heard. Charge the battery by connecting the headset to a supported USB device such as a PC. While the battery is charging, the status indicator lights up red. The status indicator light turns off when the battery is fully charged.
Resetting the headset If the headset does not respond when you try to operate it, reset it by doing the following: Connect the wireless adaptor to an applicable PlayStation ® system or other powered USB port. Reset button Insert a small pin or similar object into the reset hole in the wireless adaptor, and press down for at least one second.
Specifications Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Battery capacity 570 mAh Operating environment temperature 5°C - 35°C Dimensions (w/h/d) Wireless stereo headset 2.0: Approx. 178.3 x 191.5 x 48 mm Wireless adaptor: Approx. 17.4 x 8.4 x 36.1 mm Weight Wireless stereo headset 2.0: Approx.