4.
Use your TV
This section helps you perform basic TV operations.
4.1
Switch your TV on/off or to standby
To switch the TV on
•
Press
. POWER at the right side of the TV.
To switch to standby
•
Press
. on the remote control.
To switch on from standby without the remote control
•
Press
. POWER at the right side of the TV to switch the TV off.
•
Press
. POWER again to switch the TV on.
To switch off
•
Press
. POWER at the right side of the TV.
Note
D
Energy consumption contributes to air and water pollution. When the
power cord is plugged in, your TV consumes energy. Your TV has a very
low standby power consumption.
EN-10
4.2
Watch TV
Switch channels
1.
Press a number (1 to 999) or press
control.
For digital channels, press a number (1 to 999) followed by a dot
"." and then the corresponding sub channel number (1 to 999). Ex.
108.30.
2.
Press
PREV CH to return to the previously viewed TV channel.
POWER
Note
D
You can also switch channels by pressing CHANNEL - or + on the
side controls of the TV.
Adjust volume
1.
Press
VOL+ or VOL- on your remote control.
2.
Press
MUTE on your remote control to mute the sound.
Press MUTE again or press VOLUME - or + to restore the sound.
Note:
You can also adjust the volume by pressing VOLUME - or +
D
on the side controls of the TV.
To increase the headphone volume, press the volume button on the TV
or remote control. When headphones are plugged into the TV, the loud
speakers are automatically muted.
CH+ or CH- on your remote