Maintenance Indicators - Sharp PG-F267X Operation Manual

Maintenance Indicators

■
The warning lights (power indicator, lamp indicator and temperature warning indicator) on the
projector indicate problems inside the projector.
■
If a problem occurs, either the temperature warning indicator or the lamp indicator will
illuminate red, and the projector will enter standby mode. After the projector has entered
standby mode, follow the procedures given below.
About the temperature warning indicator
If the temperature inside the projector increases, due to blockage of the air vents, or the
setting location, "
keeps on rising, the lamp will turn off and the temperature warning indicator will blink, the
cooling fan will run, and then the projector will enter standby mode. After "
ensure you perform the measures described on page 54.
About the lamp indicator
■
When the remaining lamp life becomes 5% or less,
be displayed on the screen. When the percentage becomes 0%, it will change to
the lamp will automatically turn off and then the projector will automatically enter standby
mode. At this time, the lamp indicator will illuminate in red.
■
If you try to turn on the projector a fourth time without replacing the lamp, the
projector will not turn on.
Indicators on the Projector
Power indicator
Lamp indicator
Temperature warning
indicator
Top View
" will illuminate in the lower left corner of the picture. If the temperature
Red on Normal (Standby)
Green on Normal (Power on)
Red blinks Abnormal (See page 54.)
Green blinks Normal (Cooling)
Green on Normal
Green blinks The lamp is warming up.
Red on The lamp is shut down abnormally or requires to be
changed. (See page 54.)
Off Normal
Red on The internal temperature is abnormally high. (See page 54.)
Temperature warning
indicator
Lamp indicator
Power indicator
(yellow) and "Change The Lamp" will
" appears,
(red),
53