Table of Contents
Advertisement
Raising the Roll Bar
Important:
Always use the seat belt with the roll
bar in the raised position.
1.
Remove the hairpin cotters and remove the 2
pins.
2.
Raise the roll bar to the upright position.
3.
Install the 2 pins, and secure them with the
hairpin cotters.
Figure 10
Using the Safety-Interlock
System
WARNING
If the safety-interlock switches are
disconnected or damaged, the machine could
operate unexpectedly, causing personal
injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock
switches daily and replace any damaged
switches before operating the machine.
Understanding the
Safety-Interlock System
The safety-interlock system is designed to prevent the
engine from starting unless the following occurs:
•
The parking brake is engaged.
•
The blade-control switch (PTO) is disengaged.
•
The motion-control levers are in the N
position.
The safety-interlock system also is designed to shut
off the engine when the motion-control levers are
moved from the N
parking brake engaged or if you rise from the seat
when the PTO is engaged.
The hour meter has indicators to notify the user when
the interlock component is in the correct position.
When the component is in the correct position, an
indicator displays on the screen.
1. Indicators display when the interlock components are in the
correct position
g399201
18
-
position with the
EUTRAL
LOCK
Figure 11
-
EUTRAL
LOCK
g187670
Advertisement
Table of Contents
