Asus WS C621E SAGE Series Manual page 36

Table of Contents

Chassis intrusion connector (2-pin INTRUSION1)

These leads are for the intrusion detection feature for chassis with intrusion sensor

or microswitch. When you remove any chassis component, the sensor triggers and

sends a high level signal to these leads to record a chassis intrusion event. The default

setting is to short the CHASSIS# and the GND pin by a jumper cap to disable the

function.

TPM connector (14-1 pin TPM1)

This connector supports a Trusted Platform Module (TPM) system, which securely

store keys, digital certificates, passwords and data. A TPM system also helps enhance

network security, protect digital identities, and ensures platform integrity.

The TPM module is purchased separately.

1-20

Chapter 1: Product Introduction

Table of Contents

Ws c621e sageWs c621e sage bmcSage seriesWs c621e