Before Operating; To Set The Clock; Stop/Clear - Sharp R2130 Cooking Manual

B E F O R E O P E R A T I N G
• Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these proce-
dures:
1. Plug in the oven. Close the door. The oven display will
show
ENJOY YOUR
.
PRESS CLOCK
2. Touch the Stop/Clear pad.
3. Set clock.

TO SET THE CLOCK

• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
Timer
1
Clock
Touch Timer/Clock pad
and number 2.
2
1 2 3
Enter the correct time of
day by touching the
numbers in sequence.
OVEN PRESS CLEAR
will appear.
:
D I S P L A Y
TO SET
CLOCK
PRESS 2
ENTER
0
TIME
3
Touch Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
AND
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will intermit-
tently show after the power is reinstated. If this oc-
curs during cooking, the program will be erased. The
time of day will also be erased. Simply touch Stop/
Clear pad and reset the clock for the correct time of
day.
NOTE: Your oven can be programmed with the door
open except for START/Minute Plus and Popcorn.

STOP/CLEAR

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
20
Timer
Clock
will appear in the display.
ERROR
12:30