Additional Information For Hdmi; Optional Equipment Connection; Hdmi Connection - LG LAC955M Owner's Manual

Additional information for
HDMI
y When you connect an HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
y Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
,
Note
y If a connected HDMI device does not accept
the audio output of the player, the HDMI
device's audio sound may be distorted or
may not output.
y Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
y When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
y You cannot change the video resolution
in the HDMI IN mode. Change the video
resolution of the connected component.
y If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
Optional equipment
connection

HDMI connection

For enjoying sound only
You can enjoy the sound from the external device
you connect.
IN 1
To the Blu-ray disc player,
DVD player, etc.
1. Connect HDMI IN 1, HDMI IN 2 or HDMI IN 3 jack
on the back of the unit to HDMI OUT jack on the
audio device such as Blu-ray disc player, DVD
player, etc.
2. Set the input source to HDMI IN 1, HDMI IN
2 or HDMI IN 3. Press repeatedly FUNC on
the remote control or F on the unit until the
function is selected.
Connecting 17
IN 2 IN 3
2