Copy Function Settings; Initial Status Settings - Sharp DX-C310 Operation Manual

Interval of Image Quality
Adjustment
The machine automatically performs Image Quality
Adjustment at regular intervals in order to prevent
changes of color after repeated color printing.
This setting is used to select the interval of Image
Quality Adjustment.
The interval becomes shorter and Image Quality
Adjustment is performed more frequently in the following
order:
Setting 1 (Long), Setting 2, Setting 3, Setting 4, Setting 5
(Short)

Copy Function Settings

The following settings are related to copying. Select the [Copy Function Settings] key to configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

Initial Status Settings

The copier settings are reset when the [POWER] key (
when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode.
The following settings can be changed:
Item
Color Mode Configure default color mode settings.
Paper Tray Specify the paper tray that is selected by default.
Exposure Type Configure exposure mode settings.
Copy Ratio Specify the copy ratio that is selected by default.
Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex function to other than "1-Side to 1-Side"
2-Sided Copy
and the duplex function or automatic document feeder fails or is disabled, the setting will revert to
"1-Side to 1-Side".
Output Set the print output method that is selected by default.
Return to the This returns all items to the factory default settings.
Defaults
OPERATION PANEL (ADMINISTRATOR)
Guidelines for selection
If you print mostly business documents in black and
white, Setting 2 (factory default setting) or Setting 1
(Long) is recommended.
If you often print photos, Setting 3 or higher is
recommended.
• When Setting 3 or higher is selected, more toner is
consumed than usual, and when a job is being
printed, printing may take place more slowly.
• Image Quality Adjustment can also be performed
whenever you notice that the color has changed.
See "Image Quality
) is turned on, when the [CLEAR ALL] key (
Description
6-28
SYSTEM SETTINGS
Adjustment" (page 6-10).
) is pressed, or
Contents