Pair Your Smart Nursery Monitor With An Additional Smart Nursery Camera - Motorola Smart Nursery 7 User Manual

3.2 Pair your Smart Nursery Monitor with an additional
Smart Nursery Camera
1. Plug in and switch on the Camera, then wait for 1 minute for it to initialize.
2. Press and hold the PAIR button on the underside of the Camera until you
hear a beep tone, followed by a voice prompt indicating that the Camera is
ready for pairing.
3. Tap to select the Camera (CameraHD-xxxxxxxxx).
The App will connect with the Camera and complete the registration to
Hubble server.
4. It will take a few minutes for the Camera to connect to your Wi-Fi
before showing the connection status.
If connection fails, tap
5. The screen will show the live stream of the paired Camera when pairing is
successful.
Setting up the Smart Nursery Monitor
Retry
and repeat the steps starting from step 1.
®
network
13