Related Manuals for Motorola Smart Nursery 7
Summary of Contents for Motorola Smart Nursery 7
- Page 1 User’s Guide Brilliant Video Baby Monitor with Nursery Analytics and Advanced Baby Care Camera Model: Smart Nursery 7 The features described in this User’s Guide are subject to modifications without prior notice.
- Page 2 Welcome... to your new Smart Nursery 7 system! Thank you for purchasing your new Smart Nursery 7 system. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom via the mobile app and the Smart Nursery Monitor.
- Page 3 Overview of the Smart Nursery Monitor Display with touch screen control Power Key Press and hold to turn the monitor ON/OFF Volume Key Press -/+ to decrease/increase volume level on the monitor Earphone Socket - 3.5mm, 2-pole Micro-SD Card Socket - accepts up to 32GB Micro USB Power Socket...
- Page 4 Overview of Your Smart Nursery Camera 1. Light Sensor (for night mode detection) 7. Speaker 2. Camera Lens 8. Micro-SD Card Slot - accepts up to 32GB 3. Infrared LEDs (for night vision) 9. Charging LED 4. Power / Status indicator 10.
-
Page 5: Table Of Contents
User Account and Camera Setup on Android™ Devices ....21 5.3.1 Download Hubble for Motorola Monitors App ....21 5.3.2 Run Hubble for Motorola Monitors App on Android™ device ..................21 5.3.3 Add the Camera to your account .........21 Add additional Cameras to your Hubble Account ......22 Connect the Camera to another Android™... - Page 6 Motion Recording with 24-Hour Video History........29 Review, Share and Download Recorded Events or Notifications ..30 ® On iOS Devices ................. 31 6.5.1 Main Menu Options .............. 31 6.5.2 Camera Options ..............31 6.5.3 Remove a Camera from your Hubble Account ....33 Automatic Expression Detection and Snapshot Capture....
-
Page 7: Safety Instructions
1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Safety Instructions... - Page 8 HOW TO POSITION THE SMART NURSERY CAMERA: 3.3ft (1m) • Keep the Camera out of the reach of children (more than 3ft away). • NEVER place the Camera or cords within the crib. • The Camera should be placed on a flat surface, such as a chest of drawers, desk or shelf, or wall-mount it using the keyhole slots in the Camera base.
- Page 9 • Keep this User’s Guide for future reference. • Do not cover the Camera with a towel or blanket. • Never use extension cords with power adapters. Only use the power adapters provided. • Test this Camera and all its functions so that you are familiar with it prior to actual use.
-
Page 10: Getting Started
2. Getting Started Charging the Smart Nursery Camera LED status indicator Slide to the ON position to turn on the Camera LED charging Insert Micro USB plug indicator 1. Connect the Micro USB plug of the power adapter to the Smart Nursery Camera and the other end to a suitable electrical outlet. -
Page 11: Charging The Smart Nursery Monitor
Charging the Smart Nursery Monitor POWER ON/OFF button Insert Micro USB plug 1. Connect the Micro USB plug of the power adapter to the Smart Nursery Monitor and the other end to a suitable electrical outlet. 2. Press and hold the POWER ON/OFF button for 2 seconds to turn on the Smart Nursery Monitor. -
Page 12: Setting Up The Smart Nursery Monitor
3. Setting up the Smart Nursery Monitor IMPORTANT The Smart Nursery Monitor only works with Smart Nursery Cameras. You cannot use the analytic functions with other Motorola Camera models. Create a Hubble Account and Pair your Smart Nursery Monitor with the Smart Nursery Camera 1. -
Page 13: Pair Your Smart Nursery Monitor With An Additional Smart Nursery Camera
Pair your Smart Nursery Monitor with an additional Smart Nursery Camera 1. Plug in and switch on the Camera, then wait for 1 minute for it to initialize. 2. Press and hold the PAIR button on the underside of the Camera until you hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. -
Page 14: Using The Smart Nursery Monitor
4. Using the Smart Nursery Monitor Pinch two fingers together or spread them apart to Pinch-to-zoom adjust the zoom level. Melody Tap to select one of the 5 pre-set melodies to play on your Camera. Two-way Tap to activate the function. Tap and hold the round button to speak communication... - Page 15 Tools Tap to access the tools available on your monitor: • Baby Calendar • Baby Journal • Sleep Quality • BabyTube See Section 4.1 for details. Indicates the battery level and connection signal strength of the Camera. Indicates the battery level and Wi-Fi signal strength of the Monitor.
-
Page 16: Using The Baby Tools
Using the Baby Tools 4.1.1 Automatic Expression Detection and Snapshot Capture It’s among the notable moments for new parents when their baby smiles or cry. The automatic expression detection and snapshot capture help you capture these moments and stores them in the memory. You can then tap on Gallery > Expression to review photos and tap share button to share them on social sites like Facebook or Twitter, so that your relatives and friends can share your joy, no matter how far away they may be. -
Page 17: Baby Journal
Hygiene Change Diaper Bath Brush Teeth Trim Nails Health Baby Growth Body Temperature Medicine Vaccine 4.1.3 Baby Journal Baby Journal is a baby scrapbook that lets you document your baby’s life through photos, videos and short stories. You can also share the journal with your family and friends via Facebook Twitter 4.1.4 Sleep Quality... -
Page 18: Babytube
from sleeping soundly at night, such as high or low temperatures, noise and humidity levels, so that you can improve your baby’s sleep quality by managing these environmental conditions. It also records videos of the top 3 moments with the highest level of activity. You may watch when your baby kicks off the quilt and when he or she turns upside down in the crib. -
Page 19: Accessing The Smart Nursery Camera Via Your Mobile Devices
5. Accessing the Smart Nursery Camera via your Mobile Devices Note: You can only setup via a compatible smartphone or tablet and not via a PC. System Requirements Web Portal ® • Windows ® • Mac OS 10.7 • Chrome™ 24 ®... -
Page 20: Connecting Devices
Connecting Devices How does it work? View your Camera from any compatible device remotely. ® Wi-Fi Router Smart Nursery Camera Hubble Server When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera. Setup ®... -
Page 21: User Account And Camera Setup On Android™ Devices
4.2 and above 5.3.1 Download Hubble for Motorola Monitors App • Go to Google Play™ Store to search for "Hubble for Motorola Monitors". • Download "Hubble for Motorola Monitors" App from Google Play™ Store and install it on your Android™ device 5.3.2... -
Page 22: Add Additional Cameras To Your Hubble Account
Account. To add another Camera to your Hubble Account, repeat the steps starting from step 1 in 5.3.3. Connect the Camera to another Android™ Device Hubble for Motorola Monitors 1. Download and install " " app on another Android device. -
Page 23: User Account And Camera Setup On Iphone ® /Ipad
7.0 and above 5.6.1 Download Hubble for Motorola Monitors App • Go to App Store to search for "Hubble for Motorola Monitors". ® • Download "Hubble for Motorola Monitors" App and install it on your iPhone ® iPad ® ®... -
Page 24: Add Additional Cameras To Your Hubble Account
To add another Camera to your Hubble Account, repeat the steps starting from step 1 in 5.6.3. ® Connect the Camera to another iOS Device Hubble for Motorola Monitors 1. Download and install " " app on another ® device. -
Page 25: Camera Functions
6. Camera Functions ® Hubble for Motorola Monitors • Run App on your Android or iOS device and log into your Hubble account. On Android Devices ™ 6.1.1 Main Menu Options • Tap to access the following menu options: Cameras •... -
Page 26: Camera Options
6.1.2 Camera Options • Tap in the center of the screen to go to live streaming screen. ® • The top right of the live streaming screen shows the current Wi-Fi signal strength. • Tap on the live streaming screen to access the camera options. To exit from an option, tap on the option again. - Page 27 Two-way Tap to activate the function. Press the round communication button once to speak through the Camera Unit. Press the button again to listen to the audio feedback from the Camera Unit. Humidity The humidity level will display on the screen of your Android™...
- Page 28 Camera Settings You can change the Camera settings by tapping on the Camera Settings icon. Details • Tap to access the following settings: - Camera name - Change Image - Camera Model - Mac address - SOC version - Camera Battery - Firmware Version - Current Plan - Camera Timezone...
-
Page 29: Remove A Camera From Your Hubble Account
6.1.3 Remove a Camera from your Hubble Account 1. Tap Camera Settings icon. 2. Tap on the top right corner of the screen. 3. Tap Yes to confirm. Automatic Expression Detection and Snapshot Capture Note The options, menus and icons described below may differ slightly depending on your device. -
Page 30: Review, Share And Download Recorded Events Or Notifications
Record Motion • Select Off, Cloud or SD Card. • If you select SD Card, then choose one of the following actions when SD Card is full: • Switch to Cloud • Remove oldest clips (10 clips) Motion Detection • Select Off or On. Scheduling •... -
Page 31: On Ios
® On iOS Devices Note The options, menus and icons described below may differ slightly depending on your device. 6.5.1 Main Menu Options • Tap Cameras to show the list of cameras. • Tap Notifications to review recorded events. You can Pull to Refresh new notifications. - Page 32 Photo/Video • Take a photo or record a video from your Camera. • Tap the Video icon to start recording. Tap the red button to stop. • Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view.
-
Page 33: Remove A Camera From Your Hubble Account
Sleep Quality Tap to enter Sleep Quality monitoring to obtain an overview of the activity level, humidity, temperature, noise level and more. Smart Nursery Tap to launch Smart Nursery app. Camera Settings You can change the Camera settings by tapping on the Camera Settings icon. -
Page 34: Automatic Expression Detection And Snapshot Capture
Automatic Expression Detection and Snapshot Capture Note The options, menus and icons described below may differ slightly depending on your device. It’s among the notable moments for new parents when their baby smiles or cry. The automatic expression detection and snapshot capture help you capture these moments and displays them on the screen. -
Page 35: Review, Share And Download Recorded Events Or Notifications
Review, Share and Download Recorded Events or Notifications Note The options, menus and icons described below may differ slightly depending on your device. Recorded events or Notifications (Motion detected, Low Battery, Sound detected, Temperature too high, Temperature too low, Expression detection) are displayed below the live streaming screen. -
Page 36: Working With Pc/Notebook
7. Working with PC/Notebook • Go to https://app.hubbleconnected.com/#login User Name Password Login • Enter your , and then click if you have already created an account. • Click on the Camera list paired in your account via Android™ device or ®... -
Page 37: App And Firmware Upgrades
9. App and Firmware Upgrades App Upgrade You can find the latest version of Hubble App by visiting your mobile device’s app store (e.g.: iTunes App Store, Google Play ). From there, you can see what's new with the app and install the latest version. Occasionally, Hubble Server will send you notifications that a newer version of the Hubble app is now available. -
Page 38: Disposal Of The Device (Environment)
10. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. -
Page 39: Cleaning
11. Cleaning Clean your Camera with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. -
Page 40: Help
12. Help Noise interference To avoid background noise or echoes, ensure that there is enough distance between your device and the Camera. ® Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Camera at least 5ft (1.5m) away from these types of products, or turn them off if they appear to be causing interference. - Page 41 ® Troubleshooting for Wi-Fi Internet Viewing Category Problem Solution Description / Error Account I am unable to login Please check your user name and even after registration. password. Account I receive an error Please ensure that you have message saying: "Email registered with us.
- Page 42 Viewing When I am in "remote When you are accessing your Camera Camera mode", the video stops via a network different from your after 5 minutes. How home network (over the internet) your do I view for longer? video times out after 5 minutes. You can click on the Camera again from the Android™/iOS application to start streaming again.
- Page 43 General What is the A flashing LED indicates the following significance of LED status: flashing? Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep.
- Page 44 Connectivity Even though I am Please check your wireless router Issues accessing my Camera settings. For example, for Buffalo ® from the same Wi-Fi brand routers there is an option called network, I still find my Wireless Isolation. Please disable this Camera is shown as option.
- Page 45 App for Android™ and - Open the Google Play Store on iOS devices? your Android™ device. - Select Search - Type in "Hubble for Motorola Monitors" - The results will show the Hubble - Select to install it iOS Device:...
- Page 46 Features How many users can If you are accessing in Local Mode, access the Camera at two users are supported, beyond two one time? users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time.
-
Page 47: General Information
E-mail: support@motorolahome.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International Ltd ("BINATONE"). What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold... - Page 48 PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...
- Page 49 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage.
- Page 50 (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
- Page 51 FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 52 WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including...
-
Page 53: Technical Specifications
14. Technical Specifications Smart Nursery Monitor Frequency 2.4GHz WiFi frequency band 7 inch display Battery EU40 battery with 3500mAH Speaker 1W Stereo speakers Microphone Microphone Smart Nursery Camera Frequency 2.4GHz WiFi frequency band Image sensor color CMOS 1M Pixels Lens f 3.8mm, F2.4 IR LED 8 pcs... - Page 54 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S.