Setting Up The Smart Nursery Monitor; Create A Hubble Account And Pair Your Smart Nursery Monitor With The Smart Nursery Camera - Motorola Smart Nursery 7 User Manual

3. Setting up the Smart Nursery Monitor

IMPORTANT
The Smart Nursery Monitor only works with Smart Nursery Cameras. You
cannot use the analytic functions with other Motorola Camera models.
3.1 Create a Hubble Account and Pair your Smart Nursery
Monitor with the Smart Nursery Camera
1. Press and hold the
the Smart Nursery Monitor.
2. Tap Get Start to proceed.
3. Select a Wi-Fi Network and tap Continue.
4. Enter your Wi-Fi password and tap Connect.
5. Create a Hubble account.
6. Enter your account information, read through the Terms of Service, then
select "I agree to the Terms of Service" before you tap
NOTE
If you already have a Hubble App account, please select Already have an
Account? to login.
7. Tap Continue.
8. Plug in and switch on the Camera, then wait for 1 minute for it to initialize.
9. Press and hold the
seconds. You will hear a beep tone, followed by a voice prompt indicating
that the Camera is ready for pairing.
Continue
10. Tap
The App will search for the Camera.
11. Tap to select the Camera (CameraHD-xxxxxxxxx).
The App will connect with the Camera and complete the registration to
Hubble server.
12. It will take a few minutes for the Camera to connect to your Wi-Fi
before showing the connection status.
If connection fails, tap
13. The screen will show the live stream of the paired Camera when pairing is
successful.
Note
Paired devices will remember each other when you power on and off the
devices.
12
0
POWER ON/OFF button for 2 seconds to turn ON
PAIR
button on the underside of the Camera for 3
.
Retry
and repeat the steps starting from step 10.
Create
.
®
network
Setting up the Smart Nursery Monitor