Gigabyte Z590 VISION D User Manual page 28

8) D_LED1/D_LED2 (Addressable LED Strip Headers)
The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating
of 5A (5V) and maximum number of 1000 LEDs.
with a triangle on the plug) of the LED strip must be connected to Pin 1 of
the addressable LED strip header. Incorrect connection may lead to the
damage of the LED strip.
9) LED_C1/LED_C2 (RGB LED Strip Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
rating of 2A (12V) and maximum length of 2m.
other end to your RGB LED strip. The black wire (marked with a triangle
on the plug) of the extension cable must be connected to Pin 1 (12V) of
this header. The 12V pin (marked with an arrow) on the other end of the
extension cable must be lined up with the 12V of the LED strip. Be careful
with the connection orientation of the LED strip; incorrect connection may
lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 5, "Unique
Features," "APP Center\RGB Fusion."
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Hardware Installation
1
D_LED1
1
D_LED2
Connect your addressable LED strip
to the header. The power pin (marked
DEBUG
PORT
DEBUG
PORT
1
LED_C1
1
LED_C2
Connect one end of the RGB LED strip
extension cable to the header and the
- 28 -
Pin No. Definition
1 V (5V)
2 Data
3 No Pin
4 GND
Addressable LED
Strip
1
Pin No. Definition
1 12V
2 G
3 R
4 B
RGB LED
Strip
1
12V