Installing A Dimm; Installing An Expansion Card - Asus P Series Installation Manual

Installing a DIMM

1. Locate the DIMM sockets in the motherboard.
2. Unlock a DIMM socket by pressing the retaining clips outward.
3. Align a DIMM on the socket such that the notch on the DIMM matches the
break on the socket.
4. Push the DIMM to the socket until the retaining clips snap inward.
4
CAUTION:
• Unplug the power supply before adding or removing DIMMs. Failure to do so may
cause damage to the motherboard and/or components.
• A DDR DIMM is keyed with a notch so that it fits in only one direction. Do not force
a DIMM into a socket to avoid damaging the DIMM.

Installing an expansion card

1. Lift the PCI/PCIE riser card
assembly to remove.
3. Insert the card connector to the
slot, then press the card firmly
until it fits in place. Secure the
card with a screw.
6
2
3
Installation manual
2. Remove the metal cover opposite
the slot that you intend to use.
4. Reinstall the PCI/PCIE riser card
assembly. Make sure that the riser
card connector sits properly on the
motherboard PCI/PCIE slot.