Troubleshooting - Yamaha YZ85 2013 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
5. Adjust the drive chain slack. (See
page 7-22.)
6. Tighten the locknuts and the axle
nut to their specified torques.
Tightening torque:
Locknut:
14 Nm (1.4 m·kgf, 10 ft·lbf)
Axle nut:
90 Nm (9.0 m·kgf, 65 ft·lbf)
7

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
7-31
heaters or furnaces. Gasoline or
EAU25872
gasoline vapors can ignite or ex-
plode, causing severe injury or prop-
erty damage.
EWA15142