Roland EV-1-WL Connection Manual page 43

REVERB parameters
Parameter
TYPE
REVERB TIME
PRE DELAY
LOW CUT
HIGH CUT
EFFECT LEVEL
GUITAR/INST
EFFECT LEVEL MIC 0–100
DIRECT MIX
Value
Refer to REVERB types
0.1–10.0s
0–500ms
FLAT,
20Hz–
800Hz
630Hz–
12.5kHz,
FLAT
0–100
0–100
Explanation
Adjusts the length
(time) of reverberation.
Adjusts the time until
the reverb sound starts
to output.
Sets the frequency at
which the low cut filter
begins to take effect.
When "FLAT" is selected,
the low cut filter has no
effect.
Sets the frequency at
which the high cut filter
begins to take effect.
When "FLAT" is selected,
the high cut filter has
no effect.
Adjusts the volume of
the reverb sound for
GUITAR/INSTRUMENT.
Adjusts the volume of
the reverb sound for
MIC.
Adjusts the volume of
the direct sound.
43