Verify Internet Connection; Register System; Select Inverter System Mode - Generac Power Systems PWRcelP XVT076A03 Installation And Owner's Manual

Commissioning
ance Report. See Proof of Compliance
mation.

Verify Internet Connection

Refer to Connecting Ethernet

Register System

NOTE: If the system will not be connected to the Inter-
net, the installer will not be able to take advantage of
PWRfleet, the customer will not have access to the PWR-
view app, and the warranty will be limited to five years.
Contact Generac at 1-888-ACTIVATE to complete the
registration.
NOTE: Registering an inverter automatically registers all
REbus system components connected to that inverter.
Once the system is registered, every REbus-enabled
device can be monitored from the PWRfleet fleet
management platform and the PWRview mobile app.
To register a system:
1. See Figure 6-2. Locate the serial number and reg-
istration code on the registration decal on the front
of the inverter. This information will be required for
registration.
2. Navigate to https://pwrfleet.generac.com
using a mobile device, scan the QR code on the
registration decal and use the "Register at
PWRfleet" URL provided.
3. Follow the on-screen prompts to complete the
profile.
34
for more infor-
for more information.
or, if
DO NOT REMOVE
UNTIL INSTALLATION IS COMPLETE
SCAN FOR INSTALLATION
STEPS AND RESOURCES OR VISIT
Generac.com/Startup
System Registration:
Register your system
to activate:
• Warranty
• PWRview and PWRfleet
After-hours Software Update:
Generac.com/PWRcell/Update
System Registration Information:
SERIAL NUMBER:
XXXX-XXXXX
System Registration Information:
SERIAL NUMBER:
XXXX-XXXXX
Figure 6-2. Registration Decal

Select Inverter System Mode

NOTE: See
System Modes Overview
tion.
NOTE: For systems with a PWRcell Battery, select a
backup system mode. Do not select Grid Tie mode.
To select a system mode:
1. See
Figure 6-1. While viewing the home screen
press the center button.
2. See 6-3. A list of system modes will be dis-
Figure
played with the current mode marked with an aster-
isk.
NOTE: The list of system modes may not include all
those shown in
Figure 6-3.
Installation and Owner's Manual for Generac PWRCell Inverter
Live Firmware Updates:
1-855-395-7841
8:00am-8:00pm ET,
Mon-Sat
REGISTRATION CODE:
RRRR-RRRR
REGISTRATION CODE:
RRRR-RRRR
012615
for more informa-