Table of Contents
Advertisement
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, the drive belt
may need to be adjusted. Before you adjust the drive
belt, unplug the power cord.
Next, insert a standard screwdriver under the Right
Shield Ring (19) in the location shown by the arrow,
and gently pry the Right Shield Ring off the Right
Shield (12).
39
19
12
33
See the inset drawing at the left. Tighten the Idler
Adjustment Screw (39) slightly.
Then, plug in the power cord, and pedal the exercise
bike for a moment.
Repeat these actions until the pedals no longer slip.
Then, reattach the right shield ring.
Advertisement
Table of Contents
