Table of Contents
Advertisement
10. Have a second person hold the Handlebar (7)
near the Handlebar Carriage (99).
Locate the short wire tie (E) in the Handlebar
Carriage (99). Tie the indicated end of the
short wire tie to the two wires (G) on the
Handlebar (7).
Next, pull the other end of the short wire tie
(E) until the two wires (G) are routed through
the Handlebar Carriage (99). Then, untie and
discard the wire tie.
11. Loosen the Handlebar Knob (95). Next, slide
the Handlebar Carriage (99) forward as far as
possible. Then, tighten the Handlebar Knob.
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Handlebar Carriage (99)
with four M6 x 20mm Screws (103); start all the
Screws, and then tighten them.
12. Hold the Console Bracket (33) near the
Handlebar Carriage (99). Insert the Main Wire
(68) and the two wires (G) from the Handlebar
(7) upward through the Console Bracket.
Tip: Avoid pinching the wires. Attach the
Console Bracket (33) to the Handlebar Carriage
(99) with three M6 x 16mm Screws (107); start
all the Screws, and then tighten them.
Then, press the Wire Cover (32) onto the
Console Bracket (33).
10
7
G
E
11
103
7
99
12
Avoid pinching
the wires
107
7
12
99
Avoid pinching
the wires
95
G
32
68
33
99
107
Advertisement
Table of Contents
