Epson TM-U200 Series User Manual page 11

Note:
Do not remove the screw from the print head cover.
8. Lift up the print head cover as shown in illustration
previous page.
9. Remove all the jammed paper.
Note:
Do not pull the jammed paper in the opposite direction of paper
feeding.
10. Replace the print head cover and secure it with the screw.
11. Replace the ribbon cassette and close the autocutter.
12. If the autocutter blade is not in its normal position (if you can
see the blade in the autocutter slit, which is indicated by an
arrow in illustration
side of the autocutter, and turn the gear inside to move the
blade to the normal position.
15
13. Replace the paper roll and close the printer cover.
below), insert a screwdriver to the right
15
TM-U200 User's Manual 9
English
on the
14