Specifications/Helpful Hints; Specification; Helpful Hints - Sanyo CE42LH2WP Instruction Manual

GB

Specification

Common specification
Power source: 100 ~ 240V 50Hz/60Hz
Colour system: PAL/NTSC/NTSC4 .43/SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to pin 14)
and audio-L/R
Output: composite video from AV3 and audio L/R
AV2: BNC
Input: RGB, H and V/Y, Pb, Pr and audio L/R
Output: RGB, H and V/Y, Pb, Pr
AV3: BNC
Input: Composite video
Output: Composite video
Audio Monitor Out: CINCH L/R
Audio Speaker Out: 2 x 6W
DVI
Input: DVI-D GROUP Standard
PC
Input: Mini D-SUB 15 PIN and Audio 3.5mm Jack
Serial Port: RS232C: Input/Output
Net Organiser: POA-LN02 (optional)
When ordering these products, give the Name and Type No . to the
sales dealer .
Model name Contrast Ratio
CE42LH2R
CE42LH2DPB 1000:1
CE42LH2WP
The specifications are subject to change without notice.
●
LCD panels are manufactured to the highest possible standards . Even though 99 .99% of the pixels are effective, a tiny fraction of the pixels
●
(0 .01% or less) may be ineffective by the characteristics of the LCD panels .

SPECIFICATIONS/HELPFUL HINTS

Screen
(inches/cm) Display Native
(viewing measured Resolution
diagonally)
42"/106 .7 cm 1920 x 1080

Helpful hints

n NO PICTURE NO SOUND
Check if monitor is plugged in.
●
Check monitor is not in standby mode.
●
n POOR PICTURE
Adjust BRIGHTNESS/CONTRAST levels (too low) .
●
n NO COLOUR, PICTURE OK
Adjust COLOUR control .
●
Check lead connections.
●
Does the signal input have colour .
●
n REMOTE CONTROL DOES NOT WORK
Check batteries are inserted correctly.
●
Check condition of batteries.
●
Check to see if remote control inhibit is set ON.
●
n PICTURE OK, NO SOUND
Check external speakers are connected correctly.
●
Check lead connections to external equipment.
●
Check volume turned down or mute selected.
●
Veiwing angles
1027 x 620 x 178 .5 mm
H: 178°, V: 178°
Dimension
Weight (kg)
(W x H x D)
32 .8
33 .8
1027 x 620 x 183 mm 37 .5
GB
15