HighPoint Technologies,Inc
1.2 Features List
There is one packages. It is 144 Pin.
•
Ultra DMA 66MB/s operation.
•
Two PCI functions in a single chip.
•
Two independent ATA channels (one channel per PCI function).
•
Dedicated ATA Bus
•
256 Byte FIFO per ATA channel.
•
Large FIFO independent
•
Supports all ATAPI CD-ROM, DVD-ROM, CD-R, CD-RW, LS-120, MO, Tape and ZIP devices.
•
Easy Plug-and-Play feature.
•
Supports up to 4 devices IDE devices. (Coexist with on-board IDE)
•
Supports Hard Drive capacity large than 8.4 GB.
•
Supports MS-DOS, Windows 3.x, Windows 95, Windows 98, Windows NT, OS2 WARP,
Novell Netware and SCO UNIX.
•
Supports booting function with Flash Memory interface.
•
Automatically fine tunes to the best performance for each individual IDE/ATAPI device.
•
Backward Compatible
•
Concurrent PIO and bus master access (ATA port accessible during DMA transfer).
•
Total ATA bus tri-state by external control and Supports Hotswap (Low signal Current)
•
Reloadable PCI configuration using parallel EPROM or 2 wire serial EPROM.
•
(Loading address 0 for serial size EPROM, loading address 400H for parallel EPROM.)
•
144 Pin LQFP(Dedicated Parallel EPROM pins).
•
Small foot print 144 pin LQFP
•
Up to 44MHz PCI bus Clock.
•
Multifunction
•
Embeded serial resistor on chip for ATA spec.
1-3
Overview/Features
HPT366 Data Manual
www.highpoint-tech.com