Table of Contents
Advertisement
Operations
Before you clean
Thoroughly sweep or vacuum floor prior to
cleaning with the steam mop.
Cleaning hard floors
Your steam mop is designed to clean hard
flooring such as ceramic tile, vinyl, laminate,
marble, stone and sealed hard wood floors.
Use of your steam mop on waxed or some
unwaxed floors may result in a diminished
glossiness. The steam mop is not for use on
unsealed wood floors. For best results test in
an inconspicuous area and check the care
instructions from your flooring manufacturer.
1. Plug the unit in and wait 20 seconds for it to
heat up. Begin cleaning by slowly passing over
surface while pressing the steam on demand
trigger to emit steam as needed.
2. When the steam mop stops emitting steam,
unplug the unit. Simply remove the water tank,
refill, and continue cleaning.
www.BISSELL.com
8
Advertisement
Table of Contents
