Table of Contents
Advertisement
Basic connections
Do not connect the power cord until all other connections have been completed.
(A)
(D)
(✱)
(✱)
(A) Through output of the camera video
(B) Vertical image instability may occur when switching
the camera connected to the MON2 terminal. This is
not a defect.
(C) Amplifier
(*) Accessories
T
(✱)
- 9 -
(B)
■ Once all the connections are completed...
1
Make sure the standby switch (D) is off and plug the
power cord in.
2
Turn the standby switch (D) on.
We recommend the use of the APC UPS (uninterruptible
power supply) as power supply. In the event of a power
failure the UPS allows for continued operation of the
systems.
• Maximum output current: 500 VA/300 W
GB
(C)
(✱)
Advertisement
Table of Contents
