Envelopes - Epson Aculaser C1100 Series Instruction Manual

Envelopes

The print quality of envelopes may be irregular because different
parts of an envelope have different thicknesses. Print one or two
envelopes to check the print quality.
Caution:
c
Do not use window envelopes. The plastic on most window
envelopes will melt when it comes into contact with the fuser.
Note:
❏ Depending on the quality of envelopes, the printing environment,
or the printing procedure, envelopes might be wrinkled. Make a trial
print run before you print on a lot of envelopes.
❏ Duplex printing is not available for envelopes.
When loading envelopes, you should make paper settings as
shown below:
❏ Make settings on the Basic Settings menu in the printer driver.
Paper Size:
Paper Source:
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 251.
Please note the following when handling this media.
IB5, C6, MON, C10, DL, or C5
MP Tray (up to 20 sheets, or a stack up to
20 mm thick)
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
35