Duplex Printing - Epson Aculaser C1100 Series Instruction Manual

Note:
To remove the saved watermark, select it from the List box, then click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box, then click OK.

Duplex printing

Duplex printing prints on both sides of the paper. You can do
duplex printing automatically by installing the optional Duplex
Unit. You can also do duplex printing manually without using
the Duplex Unit. When printing for binding, the binding edge can
be specified as required to produce the desired page order.
E
As an NERGY
the double-sided printing function. Refer to
Compliance for more information on the
program.
Printing with the Duplex Unit
Follow the steps below to print with the Duplex Unit.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the
Basic settings tab.
3. Select the Duplex check box, then click the Duplex Settings
button.
4. Select a Binding position from Left, Top, or Right.
5. Specify the Binding Margin for the front and back sides of the
paper.
104
Using the Printer Software with Macintosh
®
S
TAR partner, Epson recommends the use of
E S
NERGY TAR
E S
NERGY TAR
®
®