Renault Clio User Manual page 275

REVERSING CAMERA
2
Activating, deactivating the
reversing camera
To activate or deactivate the function
from the multimedia screen 2, refer to
the multimedia instructions.
Activate or deactivate the reversing
camera and confirm your choice.
You can also adjust the camera image
settings (brightness, contrast, etc.).
(2/3)
Operating faults
When reverse gear is engaged, if the
system detects an operating fault, a
black screen is displayed temporarily
on the multimedia screen 2.
This may be caused by a fault affecting
the camera or screen (clearness, fixed
image, delayed communication etc.).
If the temporary display of the black
screen persists, please consult an ap-
proved dealer.
This function is an additional aid.
It cannot, therefore, under any circumstances replace the vigilance or the
responsibility of the driver.
The driver should always be ready for sudden incidents while driving: always
ensure that there are no small, narrow moving obstacles (such as a child, animal,
pushchair, bicycle, stone, post, etc.) in the blind spot when manoeuvring.
The screen shows a reverse mirror
image.
The frames are a representation
projected on a flat surface. This in-
formation is to not be taken into ac-
count when superimposed on a
vertical object or an object on the
ground.
Objects which appear on the edge
of the screen may be deformed.
In very bright light (snow, vehicle in
sunshine, etc.), the camera vision
may be adversely affected.
If the boot is open or poorly closed,
the message "WARNING: Boot
Open" appears and the camera dis-
play disappears.
2.139