Volvo V90 Owner's Manual page 304

DRIVER SUPPORT
||
Buttons and symbols for functions
To deactivate cruise control:
1. Press the steering wheel button
> Cruise control is set in standby mode.
2. Press the steering wheel button ◀ (1) or ▶
(3) to change to another function.
> The driver display's symbol for cruise con-
trol (4) is extinguished - which
deletes the set/stored speed.
3. Press the steering wheel button
again.
> Another function is activated.
28 NOTE: The illustration is schematic - details may vary depending on car model.
29 The Distance Warning function is only available in cars that can show information on the windscreen with a so-called Head-up display.
Distance Alert
30
302
NOTE
In cars equipped with Adaptive Cruise Con-
trol*, it is possible to switch between cruise
control and Adaptive Cruise Control – see the
heading "Switch between CC and ACC".
Related information
Cruise control (p. 297)
•
Change between Cruise control and adaptive
•
cruise control (p. 319)
28
.
(2).
(2)
29
Distance Warning*
30
The Distance Warning function can assist the
driver to notice that the time interval to the vehi-
cle ahead may be too short.
However, the requirement is that the car is
equipped with a Head-up display to be able to
show Distance Warning, which is then displayed
with a symbol on the windscreen as long as the
time interval to the vehicle ahead is shorter than
the preselected value.
Distance warning is active at speeds
above 30 km/h (20 mph) and only reacts to the
vehicle ahead travelling in the same direction. No
distance information is provided for oncoming,
slow or stationary vehicles.
NOTE
Distance Alert is only available on cars
•
that can display information on the wind-
screen with a Head-up Display.
Distance warning is deactivated during
•
the time the adaptive cruise control or
Pilot Assist is active.
* Option/accessory.