Page 1
SFL 14A SFL 18A SFL 36A English Français Español...
Page 4
SFL 14A SFL 18A SFL 36A English ..........1 Français .
Page 5
1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product.
Page 6
1.3 Product information Hilti products are designed for professional use and may be operated, ser- viced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazards when used incor- rectly by untrained personnel or when used not as directed.
Page 7
The product may be used only in a dry environment. ▶ Use this product only with Hilti Liion batteries of the B 14, B 18 and B 36 series. ▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
Page 8
Note If the battery charge state LEDs blink, please refer to the information given in the Troubleshooting section. 4 Technical data SFL 14A SFL 18A SFL 36A Voltage 14.4 V 21.6 V 36.0 V 5 Operation 5.1 Inserting the battery CAUTION Electrical hazard.
Page 9
5.4 Removing the battery SFL 36A 1. Press both release buttons. 2. Pull the battery out of the product to the rear. 5.5 Switching on and off ▶ Press the on/off switch. 5.6 Rotating the lamp head CAUTION Risk of damage to the eyes (the retina). Looking directly into the lamp presents a risk of damage to the eyes (the retina).
Page 10
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com ▶...
Page 11
The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appli- ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.