Page 3
1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
Page 4
▶ If the battery is too hot to touch it may be defective. In this case, place the appliance in a non-flammable location, well away from flammable materials, where it can be kept under observation and allowed to cool down. Contact Hilti Service after the battery has cooled down. ▶ Use only the specified batteries in the product.
The product described is a cordless lamp. It is designed to be used to illuminate areas of jobsites. Use the product in a dry environment only. ▶ Use this product only with Hilti Liion batteries of the B 14, B 22 and B 36 series. ▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
Page 9
5.2 Removing the battery SFL 14A 1. Press the release button at the rear of the battery. 2. Pull the battery out of the product to the rear. 5.3 Removing the battery SFL 22A 1. Press both release buttons. 2. Pull the battery out of the product to the rear. 5.4 Removing the battery SFL 36A English...
Page 10
1. Press both release buttons. 2. Pull the battery out of the product to the rear. 5.5 Switching on and off ▶ Press the on/off switch. 5.6 Rotating the lamp head CAUTION Risk of damage to the eyes (the retina). Looking directly into the lamp presents a risk of damage to the eyes (the retina).
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com ▶...
Page 12
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Page 13
Applicable standards: • EN ISO 12100 • EN 605981 Technical documentation filed at: • Hilti Entwicklungsgesellschaft mbH Zulassung Geräte Hiltistraße 6 86916 Kaufering Germany Schaan, 9/2015 Paolo Luccini Tassilo Deinzer (Head of BA Quality & Process Management / (Executive Vice President / Business Unit Power Business Area Electric Tools &...