Maytag MAT14PRAWW Installation Instructions Manual page 12

CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED (cont.):
5. 0 0
TIME-OF-DAY CLOCK, MINUTES
5. 0 0
This is the TIME-OF-DAY CLOCK, minute setting;
select 0-59 minutes by pressing the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance to next code.
6. 0 0
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6. 0 0
This is the TIME-OF-DAY CLOCK, hour setting; select 0-23 hours
by pressing the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance to next code.
7. 0 0
SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 0 0
This is the start hour; 0-23 hours. Select START HOUR by pressing
the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance to next code.
Press the LOWER MIDDLE key pad once to advance to next code.
8. 0 0
SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 0 0
This is the stop hour; 0-23 hours. Select STOP HOUR by pressing
the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance to next code.
9. 1 0
SPECIAL PRICE DAY
9. 1 0
This represents the day of the week and whether special pricing
is selected for that day. A number followed by '0' indicates no
selection that particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S).
Days of the week (1-7) can be chosen by pressing the LOWER
LEFT key pad. Press the LOWER LEFT key pad once to select
.special pricing for each day chosen.
When exiting set-up code '9', the display must show current day
of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
Press the LOWER MIDDLE key pad once to advance to next code.
A. 00
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
A. 00
Not Selected 'OFF'.
A.SC
Selected 'ON'. Press the LOWER RIGHT key pad once for
this selection. When selected, the money and/or cycle counts
will be viewable (if counting is selected) when the coin
box is removed.
Press the LOWER MIDDLE key pad once to advance to next code.
6.05
VALUE OF COIN 1
6.05
This represents the value of coin 1 in number of nickels:
05 = $0.25.
By pressing the LOWER LEFT key pad, you have the option
of 1-199 nickels.
Press the LOWER MIDDLE key pad once to advance to next code.
12
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
C .20
VALUE OF COIN 2
C .20
This represents the value of coin 2 in number of nickels:
20 = $1.00.
PR MODELS ONLY: Factory preset for $0.25.
By pressing the PERMANENT PRESS key pad, you have the option
of 1-199 nickels.
Press the LOWER LEFT key pad once to advance to next code.
8.00
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
8.00
Not Selected 'OFF'.
8. CS
Selected 'ON'. Press the LOWER RIGHT key pad 3 consecutive
times for this selection.
When coin slide mode is selected, set 'b.' equal to value of slide
in nickels. Set step 6 (regular cycle price) and step 3 (special cycle
price) to number of slide operations. If the installer sets up 'CS'
on a coin drop model, it will not register coins.
Press the LOWER MIDDLE key pad once to advance to next code.
E . 0 0
ADD COINS OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'. This
option causes the customer display to show the number of coins
(coin 1) to enter, rather than the dollars-and-cents amount.
E . 0 0
Not Selected 'OFF'.
E . A C
Selected 'ON'. Press the LOWER RIGHT key pad
3 consecutive times for this selection.
Press the LOWER MIDDLE key pad once to advance to next code.
F . 0 0
ENHANCED PRICING OPTION
F . 0 0
Not Selected 'OFF'.
F . CP
Cycle-Based pricing enabled. This option allows configuration
of different prices for cold, warm, and hot water cycles. Press the
LOWER RIGHT key pad for this selection.
F . S 8
Super Cycle pricing enabled. This option allows customers
to upgrade cycles by depositing extra money. Set-up codes
'H.' and 'h.' will be displayed only when this option is enabled.
Press the LOWER RIGHT key pad for this selection.
Press the LOWER MIDDLE key pad once to advance to next code.
H .0 1
SUPER CYCLE UPGRADE PRICE
(Skipped unless Super Cycle pricing is enabled.)
H .0 1
This represents the number of coin 1 required to upgrade a
base cycle to a super cycle. Advance from 0-39 by pressing
the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance to next code.
H .0 1
SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
H .0 1
This represents the Super Cycle upgrade option. Press the
LOWER LEFT key pad to step through upgrade options 1
through 3 as follows:
01 - enhanced wash, extra 3 minutes of wash tumble in addition
to the programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press the LOWER MIDDLE key pad once to advance to next code.
EXPLANATION