Honda TLX 2023 Owner's Manual page 85

Indicator Name
Malfunction
Indicator Lamp
Charging System
Indicator
Shift Position
Indicator
M (sequential
mode) Indicator/
Gear Selection
Indicator
On/Blinking
• After you have set the power mode to ON,
the vehicle performs system checks.
However, if the readiness codes have not
been set by that time, this indicator will blink
five times and then go off.
Comes on if there is a problem with the
●
emissions control systems.
● Blinks when a misfire in the engine's
cylinders is detected.
• Comes on when there is a problem with the
charging system.
• Indicates the current gear selection.
• Comes on when the sequential mode is
applied.
Explanation
• Readiness codes are part of the on-board
diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 639
2 If the Malfunction Indicator Lamp Comes On
or Blinks P. 616
• Stop in a safe place and contact a dealer
immediately.
2 Checking the Battery P. 564
2 If the Charging System Indicator Comes On
P. 615
2 Shifting P. 381
2 Sequential Mode P. 388
uuIndicatorsu
83
Continued