Honda TLX 2023 Owner's Manual page 590

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Pressure Gauge
Sealant/Air Hose
Tire Valve Stem
588
7. Press the inflator switch to turn on the kit.
u The compressor starts injecting sealant
and air into the tire.
u When the sealant injection is complete
continue to add air.
ON
Models with 235/50R18 97V tires
8.
After the air pressure reaches front: 32 psi
OFF
(220 kPa)/rear: 30 psi (210 kPa), turn off
the kit.
Models with 255/40R19 96W tires
After the air pressure reaches 32 psi (220
kPa), turn off the kit.
Models with 255/35R20 97Y tires
After the air pressure reaches front: 36 psi
(250 kPa)/rear: 33 psi (230 kPa), turn off
the kit.
u To check the pressure, occasionally turn
off the compressor and read the gauge.
9. Unplug the power plug from the accessory
power socket.
10. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
1Injecting Sealant and Air
If the required air pressure is not reached within 10
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal, and your vehicle
will need to be towed.
See an Acura dealer for a replacement sealant bottle
and proper disposal of an empty bottle.