Panasonic ES CV51 Operating Instructions Manual page 14

2
Press when finished.
Approximate amount of battery charge is
displayed as LOW – HIGH.
• It will turn off approximately 5 seconds after operating the switch.
• The shaving sensor lamp (
When the battery capacity is low
"LOW" blinks when operating the shaver.
• The appliance beeps twice after switched off.
• You can shave 2 to 3 times after "LOW" appears. (This will
differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
lower than approximately 5 °C.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while the
shaver is not operating (the switch lock is unlocked). (See
page 15.)
You cannot shave in this mode.
14
ES-CV51_EU.indb 14
While using
) blinks.
Locking/unlocking the power switch
Locking the power switch
1. Press once 2. Press
and then release. than 2 seconds
• The shaver until the switch
starts operating. lock lamp (
turns on.
• The shaver will
stop operating.
Unlocking the power switch
1. Press for more than
2 seconds until the switch
lock lamp ( ) turns off.
for more 3. Release .
• The switch
lock lamp
) ( ) will
light up for
5 seconds
and turn off.
2. Once the shaver starts
operating, release .
• The switch lock lamp ( )
will turn off.
2017/08/04 19:57:11