Intex Krystal Clear SF40220RC Owner's Manual page 10

SAND FILTER PUMP HOSE CONNECTION SETUP
• Keep this product more than 3.5 m away from the pool.
• Keep the plug of this product more than 4 m away from the pool and at a
height of 1.2 m at least.
• Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.
The 4-way valve has three hose connection ports.
1. Connect one hose (12) end to the pump motor inlet and the other end of the hose to the lower
connector with the strainer. Ensure the hoses are securely tightened.
2. Connect the second hose (12) between the 4-way valve water outlet and the upper connector
with the inlet-nozzle. Ensure the hoses are securely tighten.
3. The third hose connection port (drain/waste outlet) on the 4-way valve shall be directed to
a proper draining receptacle using a hose or pipe (not provided). Make sure the drain outlet
cover is removed before attaching the drain/waste hose or pipe.
4. The sand filter pump is now ready to filter the pool.
TO
DRAIN
RCD
RELEASE
According to the International Standard, IEC 60364-7-702, on electrical installation of swimming
pools and other basins equipment, the following installation distances must be respected:
• The filter pump must be positioned more than 3.5 m away from the pool walls.
• The power cord plug to the 220-240 volt electrical power source of the filter pump must be
positioned more than 4 m away from the pool walls.
Check your local authorities to determine the appropriate standard and requirements for "electrical
installation of swimming pools and basins equipment". The following table is for reference only:
Country/Region
International
France
Germany
The Netherlands
SAVE THESE INSTRUCTIONS
(354GS) MODEL SF40220RC SAND FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 05/26/2022
WARNING
POOL INLET AIR
ADAPTOR
WATER
OUTLET
WATER INLET
HOSE
AIR
O-RING
VALVE
>4M
AIR JET VALVE
WATER LEVEL
20
HOSE
20
CLAMP
OUTSIDE
LINER WALL
>3.5M
(ILLUSTRATION NOT TO SCALE)
Standard Number
IEC 60364-7-702
NF C 15-100-7-702
DIN VDE 0100-702
NEN 1010-702
354
English
GS
23
21
Page 10