Power Cord Specifications - Cisco 4112 Hardware Installation Manual

Power Cord Specifications

PID
FPR4K-CBL-MGMT=
FPR4K-SSD-BBLKD
FPR4K-SSD-BBLKD=
FPR4K-SSD400
FPR4K-SSD400=
FPR4K-SSD800
FPR4K-SSD800=
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
The following power cords are supported.
Figure 17: Argentina CAB-9K10A-AR
1
3
Cisco Firepower 4112, 4115, 4125, and 4145 Hardware Installation Guide
32
Only the approved power cords or jumper power cords provided with the security appliance are supported.
Plug: IRAM 2073
Connector: IEC 60320-C15
Description
Cable management brackets (spare)
SSD slot carrier
SSD slot carrier (spare)
400-GB SSD for Firepower 4112 and 4115
400-GB SSD for Firepower 4112 and 4115 (spare)
800-GB SSD for Firepower 4125 and 4145
800-GB SSD for Firepower 4125 and 4145 (spare)
2 Cord set rating: 10 A, 250 V
—
Overview