Table of Contents
Advertisement
10.8 Deactivating the
AutoDose
If you prefer to use the compartments for
manual filling as default choice, you can
deactivated the AutoDose tanks
completely.
Once you have entered the AutoDose
configuration mode by pressing Teplota
and the Odstřeďování buttons:
1. Tap on the Prací prostředek
button or the Aviváž
display shows
is excluded completely for related
tank or both.
2. After about 10 seconds the display
returns to the programme information
screen.
10.9 Manual filling the
detergent and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent
and/or other treatments in the manual
compartments.
Do not exceed the maximum
indicated level (
1. Open the detergent dispenser.
button until
: the AutoDose
).
2. Put the powder detergent in the
compartment
detergent, refer to "Manual filling the
liquid detergent".
3. If desired, pour the fabric softener in
the compartment
4. Gently close the detergent dispenser,
till click engagement.
ENGLISH
27
. When using liquid
.
Manual
Advertisement
Table of Contents
