Table of Contents
Advertisement
Other features
(See page 6)
Audio Control Setting
Adjust various parameters of sound quality.
1
Press the AUD button to enter the control mode.
Each time the AUD button is pressed, the adjustment mode
display changes as follows:
7 Bass 7 Treble 7 Balance 7 Fader 7 Volume
If you do not move to step 2 in 5 seconds, the unit will switch
back to the volume adjustment mode (i.e., the normal mode).
NOTE
Source tone memory
Each source (tape, FM, AM, and disc changer) has its own mem-
ory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled auto-
matically whenever you use that source (e.g., FM mode uses the
tone settings made for FM, AM for AM, etc.).
2
Press the d/u buttons to adjust the mode shown in the dis-
play.
Use the following table as a guide for adjusting the settings in
each mode.
Adjustment
Operation of Audio control button
mode
d button
(Display)
Bass
Bass decreased.
("BAS")
Treble
Treble decreased.
("TRE")
Balance
Left channel empha-
("BAL")
sized.
Fader
Rear channel
("FAD")
increased.
Display the time.
Switching to Time Display:
Adjust the time.
u button
Bass increased.
Treble increased.
Right channel empha-
sized.
Front channel
increased.
— 10 —
Clock Display
Press the CLK button repeatedly until the clock is displayed.
Adjusting Time
1
When the time is not displayed, first press the CLK button to
display the time.
2
Hold down the CLK button for one second or more to enter the
Time Adjustment mode.
The hour display will blink.
3
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
4
Press the MENU button to end the Time Adjustment mode.
Advertisement
Table of Contents
