Auto Uni-D Adjustment - Epson Stylus Pro 4880 Manual

Stylus Pro 4880 Field Repair Guide
Note: This adjustment automatically performs all Uni-Directional Adjustments.
1. Load 17" Enhanced Matte roll paper.
2. From the Adjustment Wizard

Auto Uni-D Adjustment

Auto Uni-D Adjustment
for the Pro 4880, select the
Printer Component, Software Item,
Auto Uni-D Adjustment.
1. Click on the Run button.
2. The Printer will print out these patterns. It will
take approximately 12 minutes
3. The Printer will read the alignment patterns
automatically (using the Multi Sensor), and
write the appropriate values to the board.
4. Click the Finish button.
LCD Display, Printer Button
1/17/08
Page 138.