Touch Sensor Tone; Menu System; Manual Clock Adjustment; Synchronize Clock - Kenwood KRC-294G Instruction Manual

Menu system

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP ON"
"BEEP OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
18) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Setting
Beep is heard.
Beep canceled.
— 18 —

Synchronize Clock

Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.

Power OFF Timer

Setting the timer to turn this unit's power OFF automatically
when Standby mode continues.
Using this setting can save the vehicle's battery power.
Display Setting
"OFF - - -" Power OFF Timer function is OFF.
"OFF 20M" Turns the power OFF after 20 minutes.
(Original setting)
"OFF 40M" Turns the power OFF after 40 minutes.
"OFF 60M" Turns the power OFF after 60 minutes.

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Setting
Synchronizes the time.
Adjust the time manually.