Removing The Palm-Rest And Keyboard Assembly; Prerequisites; Procedure - Dell P75F106 Service Manual

Removing the palm-rest and keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the battery.
3. Remove the fan.
4. Remove the heat sink.
5. Remove the solid-state drive/Intel
6. Remove the wireless card.
7. Remove the speakers.
8. Remove the hard drive.
9. Remove the touchpad.
10. Remove the power-adapter
11. Remove the display assembly.
12. Remove the I/O board.
13. Remove the power-button
14. Remove the system board.
15. Remove the power button with fingerprint reader

Procedure

After performing the above steps, we are left with the palm rest and keyboard assembly.
74

Removing the palm-rest and keyboard assembly

computer. After working inside your computer, follow the instructions in
Optane.
port.
board.
(optional).
40
assembly
After