Advertisement
Introduction
WARNING:
safety chapter before you use the product.
To do before you operate the product
•
Read the operator's manual carefully and make sure
that you understand the instructions.
•
Read the engine manual that is supplied by the
engine manufacturer.
•
Do the daily maintenance. Refer to
schedule on page 11 .
•
Install the handle with the supplied bolts.
•
Make sure that the product is installed correctly.
To start the product
1. Open the fuel valve.
8
Operation
Read and understand the
Maintenance
2. Set the throttle control to ⅓ throttle.
3. Set the choke control in the correct position.
a) If the engine is cold, close the choke.
b) If the engine is warm or the ambient temperature
is high, open the choke.
2128 - 001 - 30.06.2023
Advertisement
