Advertisement
2. Remove the oil drain plug (A) and connect a hose
(B).
A
B
3. Tilt the product and let the oil run out into the
container.
4. Remove the hose.
5. Install the oil drain plug and tighten it.
6. Fill with new engine oil. Refer to the engine manual
for the correct type of oil.
7. Do a check of the engine oil level.
To clean or replace the air filter
WARNING:
with compressed air. This causes damage to
the air filter and the risk increases that you
breathe the dangerous dust.
1. Turn the knob (A) on the air filter cover and remove
the air filter cover (B).
2. Remove the wing nut (C) from the air filter assembly
and remove the air filter assembly.
2128 - 001 - 30.06.2023
Do not clean the air filter
3. Remove the foam filter element (E) and the paper
filter element (D).
A
B
C
D
E
4. Clean the air filter housing with a moist cloth.
5. Examine the air filter elements for damage.
6. Tap the paper filter element against a hard surface
or use a vacuum cleaner to remove the particles.
CAUTION:
the vacuum cleaner touch the surface of
the paper filter element. Keep a small
distance. The sensitive surface of the
paper filter element becomes damaged
if objects touch it.
7. Clean the foam filter element with a solution of soap
and water.
8. Flush the foam filter element in clean water.
9. Compress the foam filter element to remove the
water and let the foam filter element dry fully.
10. Lubricate the foam filter element with engine oil.
11. Push a clean cloth against the foam filter element to
remove unwanted oil.
12. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING:
without the V-belt cover installed.
WARNING:
is cool before you examine the belt. The hot
parts can burn your skin.
Do not let the nozzle of
Do not operate the product
Make sure that the product
13
Advertisement
