Side-Discharging The Clippings - Toro Recycler 20376 Operator's Manual

•
For bagging the grass and leaf clippings, press the button
on the bag-on-demand lever and move the lever forward
until the button on the lever pops up (Figure 20).
G020246
1. Bag-on-demand lever (in bagging position)
•
For recycling the grass and leaf clippings, press the button
on the lever and move the lever rearward until the button
on the lever pops up.
Important: For proper operation, remove any grass
clippings and debris from the bag-on-demand door
and the surrounding opening (Figure 21) before you
move the bag-on-demand lever from one position
to another.
1. Clean here
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury. Also, an open
rear discharge area could allow small stones
and other similar debris to be thrown in the
operator's or bystander's direction and result in
serious personal injury or death to the operator
or bystanders.
Stop the engine and wait for all moving parts to
stop before cleaning the bag-on-demand door
and the surrounding opening.
Figure 20
G020235
Figure 21

Side-discharging the Clippings

Use side discharging for cutting very tall grass.
If the grass bag is on the machine and the
bag-on-demand lever is in the bagging position,
move the lever to the recycling position; refer to
Operating the Bag-on-Demand Lever (page 11).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
12