Steps
1. Insert the slim ODD assembly into the ODD slot.
2. Slide the slim ODD assembly until it snaps into place.
3. Route the power cable and data cable through the routing guides and connect the cables to the slim ODD.
Next steps
1. Install the
fan
duct.
2. Install the
side
cover.
3. Follow the procedure in
Slim optical-drive bracket
Removing the slim-ODD bracket
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
4. Remove the
slim Optical Disk
About this task
The following images indicate the location of the slim-ODD bracket and provides a visual representation of the removal
procedure.
46
Disassembly and reassembly
after working inside your
before working inside your
Drive.
computer.
computer.