Installing The 2.5-Inch Hard-Disk Drive Assembly - Dell D29M002 Service Manual

Steps
1. Place the first hard-disk drive into the hard-disk drive metal bracket and align the slots on the bracket with the slots on the
hard-disk drive.
2. Replace the two (M3x3.5) screws to secure the first hard-disk drive to the hard-disk drive metal bracket.
3. Place the second hard-disk drive into the hard-disk drive metal bracket and align the slots on the bracket with the slots on
the hard-disk drive.
4. Replace the two (M3x3.5) screws to secure the second hard-disk drive to the hard-disk drive metal bracket.
Next steps
1. Install the 2.5 in. hard-disk drive
2. Install the fan duct.
3. Install the side cover.
4. Follow the procedure in

Installing the 2.5-inch hard-disk drive assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
assembly.
after working inside your computer.
Disassembly and reassembly 23