Slim Optical-Drive Bracket; Removing The Slim-Odd Bracket - Dell OptiPlex 5080 Tower Service Manual

Steps
1. Insert the slim ODD assembly into the ODD slot.
2. Slide the slim ODD assembly until it snaps into place.
3. Route the power cable and data cable through the routing guides and connect the cables to the slim ODD.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Slim optical-drive bracket

Removing the slim-ODD bracket

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
4. Remove the slim Optical Disk
About this task
The following images indicate the location of the slim-ODD bracket and provides a visual representation of the removal procedure.
after working inside your computer.
before working inside your
Drive.
computer.
Disassembly and reassembly 47