M28E1 and E2 Mobile Rack User's Guide
Fan Removal
Use the following instructions to remove the cooling fan from the mobile
rack:
1.
Remove the fan cable from the mobile rack by gently, but fi rmly pulling the
cable from the backplane.
2.
Press both release tabs and pull the fan from the mobile rack.
4-8
Hard Drive Installation
Each M28 Mobile Rack includes dummy trays that act as place holders for hard
drives. Before using the mobile rack, you must install hard drives to the trays. Hard
drives are sold separately.
Hard Drive Tray Latch
Release Tab
Figure 4-2. Mobile Rack with Hard Drive Trays
To install hard drives into the mobile rack
1.
Press the release tabs to open the hard drive tray latch.
2.
Using the latch as a handle, pull the tray from the hard drive.
4-4